Not properly taking care of your dryer and vent can cause several unique and dangerous problems.
First, clogged up vents and eventually lead to fires and CO poisoning. This is probably the most obvious problems, but most people don’t know that not properly maintaining the dryer and dryer vent can lead to longer drying times, more wear and tear on the dryer, and even shrunken clothes. In addition to this, it will drive up those utility bills. Sure, no one wants to bear the expense of hiring a professional company to do the job. Well, with the following guide, you won’t have to.
Empty The Lint Screen
You probably already know that you need to empty the lint screen every time you use the dryer. Well, when you are performing a cleaning this is where you will want to start as well. It doesn’t matter if you have recently cleaned the screen or not. You will want to clean it again and well as taking a vacuum cleaner and cleaning inside the dryer as far as possible.
Cleaning The Dryer Vent
Even if you are emptying the lint trap every time you use the dryer it doesn’t mean that some lint won’t escape the trap and get into the duct. Left unchecked, this lint can slowly snowball and pose a real fire hazard. This is why it is crucial to attack the vent at least once every few months. click here for more about How Vent Cleaning for Your Dryer Can Prevent Fires
You can do this by purchasing a vent cleaning kit at your local hardware store. Simply pull the dryer away from the wall and remove the vent from the dryer. Now, take the brush and run in down the vent in a twisting motion. There will be some tough spots because the vent likely snakes around corners and elbows, but with a twisting motion, you should have a problem reaching the entirety of the vent.
Clean The Moisture Sensor
When most people clean their dryer vents they forget about the moisture sensor. This sensor is located just underneath the door and it used to shut off the machine when clothes are dry. Over time the sensor can get covered with film and cause the dryer to not know when the laundry is dry. Cleaning the sensor with a cotton ball and rubbing alcohol will do the trick.
Clean The Exhaust Opening
The exhaust is also another item that is often overlooked. This is where the dryer vent protrudes the home. This is usually located on the side of the home or on the roof. You will want to make sure that it is free of lint or bird’s nests.